The basic method of camlock coupling adhesive

(1) Resistance to media performance

Camlock coupling in different properties of gas or annixture of the media in the adhesive force is quite different, and even the work process of the corner of the individual is mainly air, water, oil and acid. When using adhesives, you should choose the medium-resistant adhesive

(2) Adhesive strength

The bond strength is divided into tensile strength, shear strength, torsional shear strength and peel strength. Adhesive strength refers to the breaking strength of the adhesive in different directions of force. Select the adhesive, should be based on the location of mechanical parts and the feelings of misunderstanding to choose the appropriate strength of glue.

(3) Temperature performance

Camlock coupling refers to the temperature range of the fully cured adhesive layer, such as a temperature of -60 º C-120 º C, that is, the viscosity and can be in the range of -60 º C to 120 º C applicable, beyond this limit, significantly decreased adhesion.

(4) Curing time

Camlock coupling curing time refers to the adhesive when the adhesive at room temperature with the plastic into a solid rubber room reported the time required. The initial solid refers to the adhesive layer is not due to self-weight and fall off the time required; solid refers to the glue layer is fully cured, and to achieve the highest adhesive strength and resistance to the best time required for media. Nylon cable to slow-drying glue to shorten the curing time, available heat blowing, oven baking and other measures to heat, but the heating temperature and time should be determined according to different kinds of adhesive.